Automatic Capsule Filling Machine

NJP-3 series automatic capsule filling machine Features:
1, the whole appearance, sophisticated technology, simple operation, easy to use.
2, used to increase the working table, ensure the stability of the machine operation (work surfaces than other manufacturers large work surface 90mm). All the contact portion of the drug are made of high quality stainless steel and powder contact portion parts (1), measuring plate SUS316L; (2), the filling lever SUS316L; (3), the upper and lower module SUS316L; (4), hopper SUS304; ( 5), Spatulas, a doctor blade SUS304; (6), seals and other SUS316L.
3, the whole bearings are used in all IKO (Japan), NSK (Japan), SKF (Sweden); electrical appliances are using the German original Siemens; indexer Taiwan Tanzi; although increases manufacturing costs, but greatly improve the life of the equipment and quality.
4, standardization of products, equipment, spare parts can be interchangeable mold replacement convenient and accurate.

NJP-3 series automatic capsule filling machine Product Innovation:
1, a three-dimensional design will fill the base adjustment mechanism to adequately address the problem of leaking powder production project, to avoid the phenomenon of friction between the metering disk and the copper plate, improve its precision highly, extended service life.
2 cam aircraft are owned by the German DMG six-axis CNC machining centers forming (the only one). The machine adopts Cam transmission section 40C steel surface nitriding treatment, nitriding depth 0.5--1.0mm, HR55-60; cam groove, flat groove cam: 38CrMoAL quenched Gang, surface nitriding treatment, nitriding depth 0.5--1.0 mm, GRC55 ~ 60; pillar: Gcr15 induction hardening depth of 0.7 ~ 1.0mm, HRC55 ~ 60; ensure that the accessories easy to wear.
3, in order to ensure lubrication and service life of the machine parts, I am in the old equipment on the basis of an additional automatic pump, so that each cam gear has a tubing, for real-time fuel (fuel to Auto, time, the number adjustable), eliminating maintenance time (the only one to use).
4, the capsule spout increases the compressor device, effectively solves the problem of the capsule due to electrostatic discharge opening at the discharge port clogging caused in.
5, improved turntable mold design, original Japanese Linear oil-bearing 90, to improve the service life of equipment (other manufacturers turntable bearing only 40, but 50 additional copper sleeve worn installation fast, easy to replace).
6, increase the metering plate design, thereby increasing the dosing plate powder flow uniformity, improved Spatulas mechanism, so that the weighing pan each station and the other end to the loaded amount of consistent, effective control of the amount of difference within ± 3% .